联系我们
联系人：王经理
手机：15364007013
电话：0731-85135223
传真：0731-85137460
邮件：info#zonhe.net 把#改为@
邮编：410015
地址：湖南省长沙市芙蓉中路二段116号芙蓉同发大厦
网址：www.zonhe.net联系QQ：
工业备品备件详情
蝶阀A OR 80 Butterfly valve DIN42560 N0282058
蝶阀A OR 80 Butterfly valve DIN42560 N0282058
蝶形阀用于管道充满液体的电力变压器或电抗器配件。
蝶形阀使更换部件，而无需移除任何绝缘液体。
比其它阀门的主要优点是结构紧凑和具有成本效益的。
蝶阀，DIN42560 80
随着对焊法兰
标称宽度80毫米（3“）
高度H=70毫米
节流阀A型被设计为在变压器的壁，或在连接管焊接。
法兰锻钢S355J2G3。
由于一个金属 - 金属密封低泄漏是允许的。
我们的节流阀DIN42560 80满足气密性要求和工作条件，根据DIN42560和EN50216-8。
外观设计：
O型圈密封ACC槽。客户要求。
高度H=70 mm或H =85毫米。
18毫米钻孔或M16螺纹。
改性对焊符合。客户要求。
特殊设计可达-50°C。
推力成员在几个版本：
符合推力成员。 DIN42560，拧紧。
锁定盖，拧紧。
拉手，拧紧。
带锁把手，拧紧。
我们的阀A型DIN42560对应A1型（短期和中期）EN50216-8。
Butterfly valves
Butterfly valves are used on pipelines of liquid-filled power transformers or on reactor fittings.
Butterfly valves enable a replacement of components without the necessity of removing any insulating liquid.
The main advantage compared to other valves is the compact and cost-efficient construction.
Butterfly valve DIN 42560 A NW 80
With welding neck flange
Nominal width 80 mm (3")
Height H = 70 mm
The throttle valve type A is designed to be welded in the transformer wall or in connecting pipes.
The flange is made of forged steel S355J2G3.
Due to a metal-metal sealing a low leakage is allowable.
Our throttle valves DIN 42560 A NW 80 fulfil the tightness requirements and operating conditions according to DIN 42560 as well as EN 50216-8.
Designs:
Groove for O-ring-sealing acc. to customer request.
Height H = 70 mm or H = 85 mm.
18 mm boring or M16 threads.
Modified welding neck acc. to customer request.
Special design up to -50°C possible.
Thrust member in several versions:
Thrust member acc. to DIN 42560, tightened.
Lockable cap, tightened.
Handle, tightened.
Lockable handle, tightened.
Our valve type A DIN 42560 corresponds to type A1 (short and middle) of EN 50216-8.